|
|
|
6 stuks demotoestellen CROWN I-T4000 aan 1799 euro , INCLUSIEF BTW en verzending.
De toestellen zijn voorzien van de nieuwste firmware en hebben nog 12 maanden fabrieksgarantie
Power Output
- 2-Ohm Stereo (Per Channel): 1800W
- 4-Ohm Stereo (Per Channel): 2000W
- 8-Ohm Stereo (Per Channel): 1250W
- 4-Ohm Bridged-Mono: 3600W
- 8-Ohm Bridged-Mono: 4000W
Specifications
- Frequency Response (at 1 Watt, 20 Hz - 20 kHz): 0.25dB.
- Signal to Noise Ratio below rated 8-Ohm power, A-weighted: >105 dB
- Total Harmonic Distortion (THD) at full rated power: < 0.35%.
- Damping Factor (20 Hz to 100 Hz): > 5000.
- Common Mode Rejection (CMR) (20 Hz to 1 kHz): > 50 dB.
- DC Output Offset: < 3 mV.
- Input Impedance (nominal): 20 kilohms Balanced, 10 kilohms Unbalanced.
- Maximum Input Level: +15 dBu or +22 dBu, depending on input Sensitivity.
- Latency (Analog, Digital inputs): 1.13 ms Analog, 1.81 ms Digital (96 kHz).
- A/D, D/A Converters: 24-bit, 96-kHz Cirrus Logic.
- Digital Input: AES/EBU, 16-24 bit, 32-48 kHz. Onboard sample rate converter. Optional CobraNet input coming soon.
- Network: Onboard TCP/IQ, compatible with standard 100-Mb Ethernet hardware.
- DSP: 24-bit conversion with 32-bit, floating-point DSP processing. Bypass mode available. Has 64 assignable filters with 9 different Filter types. Includes all-pass filters, over 2 seconds of delay available per channel, and dual uncorrelated-noise and sine-wave generators.
- Load Supervision: Monitors the average Impedance on the output of the Amplifier. If the Impedance falls outside the specified high/low limits, this function alerts the user via the front panel display, and via the IQwic software when Amp is on an IQ Network.
- Error Reporting: Reports clip errors, thermal errors, fault conditions and load monitoring errors for each channel via the front panel display and via IQwic software when Amp is on an IQ Network.
- Attenuators: Speed sensitive, continuously variable rotary Encoder, 0.5 dB steps, range 0 to 100 dB.
|
|
| Crown I-Tech 4000 |
| |
 |
| 2 x 1800 Watt @ 2 ohm / 2 x 2000 Watt @ 4 ohm |
| |
Nog slechts 6 stuks Crown I-T 4000 aan deze lage prijs.
De versterkers komen uit een overname van een klant welke overgeschakeld is naar de I-T 4000 HD reeks.
De toestellen genieten nog 1 jaar garantie.
OP=OP
|
|
|
|
|
|
